GSM Code for Call Forwarding/Waiting/Caller ID / Call Display/Call Barring

GSM Code Scheme and Passwords

Most of the codes given below follow this pattern. With enough use, you will learn to know what each means:
  • * activate
  • ** register and activate
  • *# check status
  • # unregister
  • ## unregister and deactivate
Some service providers will also let you change your passwords as follows:
Change Call Barring PIN code: **03*oldPIN*newPIN*newPIN#
Change SIM PIN code: **04*oldPIN*newPIN*newPIN#
If you have never set a PIN before, try the usual default of '0000', '1111', or the last 4 digits of your phone number. If none of these work then contact your service provider. Note that the PIN is not the same as the Call Barring [code] given in the Call Barring section below. Call Forwarding

GSM supports four different types of Call Forwarding or Call Diversion. These are:
Forward all calls
Unconditionally forwards all calls made to your phone to another location, such as another phone number or voice mail. This setting, if activated, overrides all other types of conditional forwarding mentioned below.
Forward if busy/engaged
Forwards calls to another location if you are using your phone and you have either disabled call waiting or if you are in the process of making an outgoing call.
Forward if no answer
Will forward calls to another location if the call is not answered after a set period of time.
Forward if unreachable
Forwards calls to another location if the handset is off or outside a service area.
The table below gives the call forwarding codes. Hit [SEND] after any command. Some of these commands may be accessible on your handset's menu, but this varies between handsets and service providers.
[dest] refers to the destination number, if long distance remember to add the appropriate prefix codes; [sec] refers to the delay in seconds before forwarding the call. Minimum 5 Maximum 30 in 5 second increments only (i.e., 5,10,15,20,25, or 30; default is usually 15).

FeatureAll CallsVoice CallsData CallsFax CallsLine 2 Calls
Forward all
Activate:
Cancel&Retain:
Reestablish:
Cancel&Forget:
Status:

*21*[dest]#
#21#
*21#
##21#
*#21#

*21*[dest]*11#
#21*11#
*21*11#
##21*11#
*#21*11#

*21*[dest]*25#
#21*25#
*21*25#
##21*25#
*#21*25#

*21*[dest]*13#
#21*13#
*21*13#
##21*13#
*#21*13#

*21*[dest]*89#
#21*89#
*21*89#
##21*89#
*#21*89#
If busy
Activate:
Cancel&Retain:
Reestablish:
Cancel&Forget:
Status:

*67*[dest]#
#67#
*67#
##67#
*#67#

*67*[dest]*11#
#67*11#
*67*11#
##67*11#
*#67*11#

*67*[dest]*25#
#67*25#
*67*25#
##67*25#
*#67*25#

*67*[dest]*13#
#67*13#
*67*13#
##67*13#
*#67*13#

*67*[dest]*89#
#67*89#
*67*89#
##67*89#
*#67*89#
If no answer
Activate:
Cancel&Retain:
Reestablish:
Cancel&Forget:
Status:

*61*[dest]*[sec]#
#61#
*61#
##61#
*#61#

*61*[dest]*11*[sec]#
#61*11#
*61*11#
##61*11#
*#61*11#

*61*[dest]*25*[sec]#
#61*25#
*61*25#
##61*25#
*#61*25#

*61*[dest]*13*[sec]#
#61*13#
*61*13#
##61*13#
*#61*13#

*61*[dest]*89*[sec]#
#61*89#
*61*89#
##61*89#
*#61*89#
If unreachable
Activate:
Cancel&Retain:
Reestablish:
Cancel&Forget:
Status:

*62*[dest]#
#62#
*62#
##62#
*#62#

*62*[dest]*11#
#62*11#
*62*11#
##62*11#
*#62*11#

*62*[dest]*25#
#62*25#
*62*25#
##62*25#
*#62*25#

*62*[dest]*13#
#62*13#
*62*13#
##62*13#
*#62*13#

*62*[dest]*89#
#62*89#
*62*89#
##62*89#
*#62*89#
All 4
Activate:
Cancel&Retain:
Reestablish:
Cancel&Forget:
Status:

*002*[dest]#
#002#
*002#
##002#
*#002#

*002*[dest]*11#
#002*11#
*002*11#
##002*11#
*#002*11#

*002*[dest]*25#
#002*25#
*002*25#
##002*25#
*#002*25#

*002*[dest]*13#
#002*13#
*002*13#
##002*13#
*#002*13#

*002*[dest]*89#
#002*89#
*002*89#
##002*89#
*#002*89#
All conditionals
Activate:
Cancel&Retain:
Reestablish:
Cancel&Forget:
Status:

*004*[dest]#
#004#
*004#
##004#
*#004#

*004*[dest]*11#
#004*11#
*004*11#
##004*11#
*#004*11#

*004*[dest]*25#
#004*25#
*004*25#
##004*25#
*#004*25#

*004*[dest]*13#
#004*13#
*004*13#
##004*13#
*#004*13#

*004*[dest]*89#
#004*89#
*004*89#
##004*89#
*#004*89#
Most people will arrange to forward their voice calls to a voice mailbox number. For Canadian Fido customers, you can enter the number "3436" (this spells FIDO) into the [dest] field and this will set the local voice mailbox access number automatically for you. If you are unsure what your local voice mailbox number is then contact your service provider.
GSM also supports call forwarding if you hit the end key on an incoming call. This is particularly handy if your phone rings and you either can't or don't want to answer it. Hitting the [END] key will automatically forward the caller to whatever number you have set up to forward to under the "forward if no answer" or "forward all". If you haven't set up call forwarding and hit the [END] key during an incoming call then your caller will hear an initial ringing tone followed by a busy or engaged tone.
Call Waiting

Activate: *43#
Cancel: #43#
Status: *#43# To answer an incoming call waiting just hit the [SEND] key and your first caller will be put on hold and you can talk to the second caller. Alternatively you can hit [2][SEND].
To join both callers in a conference call, select the "join" or "conference" setting on your phone (not supported on all handsets).
If you wish to take the second call and are finished talking to the first caller then hit the [END] key and your phone will start ringing with the second caller and then hit [SEND] to answer the call. Alternatively you can hit [1][SEND].
If you do not wish to talk to the second caller and want to continue to talk to the first caller you can either choose to ignore the call waiting tone or hit [0][SEND].
Caller ID / Call Display

If you wish to either show or hide your phone number on outgoing calls then you may either set this on your phone's menu or manually enter the code before dialing. These codes will override whatever menu setting you have on a per-call basis. Do not display: #31#[phone number]
Display: *31#[phone number]
Status: *#31#
North American GSM service providers also support the landline codes for this feature (these also work on CDMA and iDEN phones):
Do not display: *67[phone number]
Display: *82[phone number]
There are also codes to show or prevent incoming numbers from being shown on your handset if you subscribe to this feature. I'm not too sure why you'd want to do this, but just in case you do:
Do not display: #30#
Display: *30#
Status: *#30#
Call Barring

If you wish to restrict calls that can be made or received by your handset then this is referred to as "Call Barring". All Call Barring codes are specific to your network, so you'll have to ask your service provider what [code] to enter below:
FeatureAllOutgoingIncomingOutgoing
International
Outgoing Intl
except home
country
Incoming outside
home country
Activate:
Cancel:
Status:
**330*[code]#
##330*[code]#
*#330#
**333*[code]#
##333*[code]#
*#333#
**35*[code]#
##35*[code]#
*#35#
**331*[code]#
##331*[code]#
*#331#
**332*[code]#
##332*[code]#
*#332#
**351*[code]#
##351*[code]#
*#351#

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS